In the previous article share articles on Canon Pixma MX320 MX328 Resume Manual Reset
How to Manually Operation resetter canon iP2770
The best way to reset iP2770 is you can follow the guide below:
Resetter Canon IP2770
- Turn off your printer (in the dead / not lit), then plug in the power cord
- Then press the Resume button for 2 seconds
- Then press the Power button and the Resume button until the green light is on.
- Remove the Resume button, Power button but not released.
- Still by pressing the Power button, press the Resume 5 times.
- Remove the Power and Resume buttons together.
- LED light will flash and the green LED will light up.
- The computer will detect the new hardware, just ignore this command.
- Turn off the printer canon iP2770 with press Power button.
- Turn on iP2770 printer with the Power button, and see your iP2770 printer is back to normal.
Canon iP2770 Resetter
If the above does not work for Reset Canon iP2770, try the following :- Turn on canon iP2770 and printers normal
- Try printing paper for testing, it will display the error code number 5200.
- Unplug the printer's power cable (unplug the power cord) without pressing any button (not press the button on / off).
- Open the case and replace your printer cartridges manually
- Remove all the ink cartridges from the place and let the cartridge lid open.
- Turn on the printer with the plug-in electric power cords, and look at the cartridge head will move left to right and then stop in the middle.
- Place the cartridge, and then close the printer casing properly.
- The printer will return to normal.
Không có nhận xét nào:
Đăng nhận xét